×
Welcome, Guest

Sign in to learn, create, and do more with the product you love.

Sign In

News & Updates

Filters:
On-Demand Webinar •
Tips & Tricks: Board Shape Creation

Being able to design a board in your ECAD environment doesn’t mean that it is manufacturable in real life. You have to make sure your CAD representation won’t have any problems in the real world by taking some precautions. For example, there are certain areas that need to be free of components and have specified clearances like your board edge. This webinar will help you get acquainted with the creation and modification of your board shape so that you can ensure manufacturability.

Read More
Blog •
Is There an SPI Trace Impedance Requirement?

There is no SPI trace impedance requirement? The reality is that SPI lines only start to need impedance control when the length of the interconnect becomes very long. And because there is no specific impedance requirement in the bus, you have some freedom in channel design and termination. So what exactly qualifies as “very long” and when is some termination method needed? We’ll break it down in this article.

Read More
Embedded thumbnail for How to Remove Unused Pad Shapes
How-To's •
How to Remove Unused Pad Shapes

Unused pad shapes can cause distortion among other problems so it is best to exclude them from your designs. This video shows how to remove unused pad shapes.

Start Watching
Embedded thumbnail for Stackup Presets and Templates
How to work with Layer Stack Manager •
Stackup Presets and Templates

In this video, we will learn how to apply predefined layer stacks to the board, as well as how to save the layer stack file as a template.

Start Watching
The Skin Effect and EM Fields
Blog •
The Skin Effect, Current Density, and the Electromagnetic Field

During this year's AltiumLive CONNECT event, I recall receiving an interesting question about the skin effect and the distribution of current due to the presence of ground in coplanar transmission lines. In this article, we'll look at the electric field around a transmission line carrying a signal, and how this might be impacted by the skin effect.

Read More
Embedded thumbnail for Creating a PCB Footprint Assembly Drawing
How to create a PCB Footprint •
Creating a PCB Footprint Assembly Drawing

If you need to create an assembly drawing of your PCB Footprint for your outjob files we can show you how in Altium Designer. We’ll walk through all the different options for your assembly drawing in your Draftsman document, how to create your assembly drawing and assign it designators.

Start Watching
Packaging for your PCBAs
Blog •
What You Need for PCB Packaging and Shipping

When you get your PCBA back from an assembler, you’ll notice the packaging materials used to pack and ship the PCBA. Those materials are specific to electronics, and if you build products on behalf of clients, it’s important to know the packaging materials used for packing and shipping electronics. In this article I’ll show the main set of materials and equipment used to package electronics assemblies.

Read More
Embedded thumbnail for Using the ActiveBOM
How-To's •
Using the ActiveBOM

Using the ActiveBOM: The Bill of Materials (BOM) contains a list of all the components with their designators, part numbers, values, and other parameters. An ActiveBOM manages the mapping from the design component (part) to the part that is purchased. This video describes how to use the ActiveBOM document to create an up-to-date list of components needed for your project.

Start Watching
Embedded thumbnail for Using Back Drills in your Stackup
How to work with Layer Stack Manager •
Using Back Drills in your Stackup

In this video, we will learn about Back Drilling technology, how to set up back drilling using the layer stack manager, and how to set up the Stub Length sizes for back drilling by specifying applicable nets using the Design Rules Editor.

Start Watching
PCB Output files
Blog •
How to Make PCB Gerber Files in Altium Designer Step-by-Step

Once you've got your PCB layout finished and you're ready to start preparing for manufacturing, one of the critical steps is to create PCB Gerber files. When you're ready to create your Gerber files, you need the right set of CAM processor tools that can take data from your PCB layout. In this article, we'll guide you through this process of how to make PCB Gerber files and show some example tasks you might need to perform to generate them.

Read More
Component composition
On-Demand Webinar •
Help Ensure The Best Designs With Component Management

There are many aspects to designing a PCB. One of the larger aspects has to do with managing your components. We all need components for our designs, but are those components in our library and designs up-to-date or even purchasable? These questions need to be answered before we can safely use them. Altium Designer® has several tools to help you manage the components in your libraries and designs.

Read More
Teardrops on Differential Pairs?
Blog •
Should You Place Teardrops on Differential Pairs?

One of the major factors impacting reliability of a PCBA is the use of teardrops on traces in the PCB. Like many aspects of reliability, the considerations also span into the signal integrity domain, particularly as more high-reliability products require greater data handling capabilities and run at higher speeds. In this article, I’ll break down the issues present in teardrop usage on differential pairs and how these may affect impedance.

Read More
Embedded thumbnail for How to Customize The Properties Panel
How-To's •
How to Customize The Properties Panel

How to Customize The Properties Panel: This video will go over how to customize the look and feel of the properties panel in Altium Designer. By being able to personalize your workspace you can greatly improve your efficiency

Start Watching
Embedded thumbnail for How to Create and Use Impedance Profiles
How to work with Layer Stack Manager •
How to Create and Use Impedance Profiles

Using the Altium Designer Layer Stack Manager, we will show how to create impedance profiles for transmission lines and how to apply them to the circuit board using the PCB Rules and Constraints Editor.

Start Watching
Broken PCB
Blog •
The High-Reliability PCBA Design and Test Challenge

High-reliability electronics must go through multiple rounds of testing and qualification to ensure they can withstand their intended operating environment. Designing to performance standards, whether the baseline IPC standards or more stringent industry standards, is the first step in ensuring a reliable circuit board. In this e-book, readers will gain a thorough look into PCB testing and analysis, starting from basic tests performed on bare boards and completed assemblies.

Read More
Embedded thumbnail for Creating a PCB Footprint Courtyard
How to create a PCB Footprint •
Creating a PCB Footprint Courtyard

The courtyard is an essential piece when you want to create a PCB Footprint in Altium Designer. We’ll talk about what a courtyard is, how to create a courtyard, and how to format a courtyard correctly for your PCB footprint.

Start Watching
Where to place AC Caps on PCIe Lanes
Blog •
AC Coupling Capacitors in PCIe Routing

Coupling capacitors find plenty of uses in analog applications and on differential protocols, acting essentially as high pass filters that remove DC bias carried seen on a signal. In the case of PCIe, there are a few reasons to place AC coupling capacitors on differential pairs beyond the fact that AC coupling capacitors are listed in the standard. In this article, we’ll look briefly at where to place coupling capacitors on PCIe links, as well as the reasons these are placed on PCIe links.

Read More
Embedded thumbnail for How to Edit Existing Tracks in Altium Designer
How-To's •
How to Edit Existing Tracks in Altium Designer

This new design rule flags a violation when the creepage distance across non-conductive surface and edge regions of the board, between the targeted signals, is equal to or less than the specified Creepage distance.

Start Watching
Tuning dialog
Blog •
Altium Designer 22.7 Update

We are happy to announce that the Altium Designer 22.7 update is now available. Altium Designer 22.7 continues to focus on improving the user experience, as well as performance and stability of the software, based on feedback from our users. Check out the key new features in the What's New section on the left side of this window!

Read More
Embedded thumbnail for Creating a PCB Footprint Silkscreen Overlay
How to create a PCB Footprint •
Creating a PCB Footprint Silkscreen Overlay

When creating a PCB footprint in Altium Designer creating a silkscreen overlay is an important requirement. We’ll go over the standards for creating a silkscreen overlay for a footprint and the steps to creating one, such as constructing lines and measuring distance of objects and primitives.

Start Watching
Blog •
Pi.MX8 Project - Board Layout Part 2

We are continuing the exploration of board layout in our Pi.MX8 Project. In this chapter, we focus on defining the impedance profiles, establishing matching design rules for the correct trace width, and initiating the routing of the DRAM interface.

Read More
Blog •
Constraint Manager Whitepaper

Explore the precision of PCB design with Altium Designer's latest Constraint Manager! Hone your skills in component positioning, routing, and rule definition to enhance your design capabilities with Altium's state-of-the-art tools. Discover more about this cutting-edge feature in the manual today.

Read More
Blog •
USB to Serial-Over-RJ45 Module

Have you considered converting a USB interface to serial (UART), while delivering data over a custom Ethernet cable and RJ45 connectors? If so, we invite you to check out this article on building a USB to Serial-Over-RJ45 Module. Additionally, you'll find a link to our workspace to explore the entire project.

Read More
Blog •
Pi.MX8 Project - Board Layout Part 1

Our exploration of the Pi.MX8 open-source computer module project progresses. In this third chapter, our focus shifts to the PCB layout preparation of the board. Key topics include defining the layerstack and component break-out routing.

Read More
Blog •
PCB CoDesign Whitepaper

Design faster together with the innovative PCB CoDesign feature, exclusively available in Altium Designer. This cutting-edge functionality seamlessly integrates schematic and PCB design, facilitating concurrent work by multiple engineers on the same project. Learn more about this groundbreaking feature in our comprehensive manual.

Read More
Blog •
How to Test Suspect Electronic Components

Electronic components power nearly everything in our modern lives. However, as long as there are buyers for parts, counterfeiters will persist in their endeavors. Financial losses resulting from fake components are challenging to ascertain due to enforcement limitations and the difficulty in collecting data on the issue. In this article, we demonstrate how to test and verify components in batch orders.

Read More
Blog •
Design Phase – Lid Assembly Electronics Part 2

We are going deeper into lid assembly electronics in our Open Source Laptop project. In this chapter we will tackle the PCB design of the webcam board and show you how to deal with some expected challenges, such as overall small form factor of the board or breaking out the microscopic webcam image sensor.

Read More
Embedded thumbnail for Minimize Manual Effort With Automatic Length Tuning
How-To's •
Minimize Manual Effort With Automatic Length Tuning

Wishing you a Happy New Year! We invite you to join us for the first video of the year. Unlock the power of Automatic Length Tuning in Altium Designer. This feature is seamlessly integrated into the main Route menu in 2D mode, streamlining your design process for enhanced precision and efficiency.

Start Watching
Embedded thumbnail for Happy Holidays!!!
How-To's •
Happy Holidays!!!

Altium sending you warm wishes for Christmas filled with all the things that bring you joy, surrounded by the people you love and may your dreams blossom and make all your aspirations come true in the coming year.

Start Watching
Embedded thumbnail for Harness Design in Altium Designer helps Lazer Lamps built better products faster
Success Stories •
Harness Design in Altium Designer helps Lazer Lamps built better products faster

Hear the story of how Altium Designer's Harness Design feature streamlines wiring system design to empower Lazer Lamps’ engineering team to craft superior LED driving lights in record time. From seamless collaboration among their engineering teams to the intuitive design features that accelerated their workflows, witness firsthand how Altium Designer helped improve Lazer Lamps design processes.

Start Watching
Embedded thumbnail for Altium Designer 24 - Out Now!
New in Altium Designer 24 •
Altium Designer 24 - Out Now!

Altium Designer 24 has arrived, heralding a groundbreaking transformation. Now available for download, it introduces exciting features including PCB CoDesign, Constraint Manager, PCB Layout Replication, Ansys CoDesigner and much more. Altium Designer isn't just a requested tool; it's a requirement that establishes the standard in electronic design.

Start Watching
Embedded thumbnail for Coming Soon: Sectional View
New in Altium Designer 24 •
Coming Soon: Sectional View

Discover more about our latest upgraded feature, premiering on December 13th. The Sectional View is a tool that simplifies and enhances your PCB design process. Whether you're troubleshooting complex designs or streamlining your workflow, it provides clarity and efficiency.

Start Watching
Embedded thumbnail for Coming Soon: Advanced Mixed Simulation Features
New in Altium Designer 24 •
Coming Soon: Advanced Mixed Simulation Features

We invite you to explore the world of mixed simulation. Delve deeper into key information about this feature and its enhanced functionalities, available starting December 13th. Set up mixed-signal simulations to ensure accuracy and reliability in your design testing

Start Watching
Embedded thumbnail for Coming Soon: Harness MCAD CoDesign
New in Altium Designer 24 •
Coming Soon: Harness MCAD CoDesign

In this short video, you can explore how Harness MCAD CoDesign, available on the 13th of December, streamlines the design process by minimizing errors, accelerating iterations, and ensuring a synchronized development process. Altium Designer 24 is on the horizon, and it's not just a request but a requirement for optimizing your electronic design process.

Start Watching
Embedded thumbnail for Altium Designer 24: From Requested to Required
New in Altium Designer 24 •
Altium Designer 24: From Requested to Required

Altium Designer 24 is getting closer! In this short video, we are presenting a list of new features and improvements that will be available starting from the 13th of December in our software.

Start Watching
Embedded thumbnail for Coming Soon: Harness Multi-Board
How-To's •
Coming Soon: Harness Multi-Board

Altium Designer's all-in-one approach to electronic design seamlessly combines Harness and Multi-Board Design capabilities, allowing you to create complex multi-board systems with ease. This new feature, available from December 13th, provides an opportunity to bring design and manufacturing teams together, inspiring a streamlined design process, reducing the risk of errors, and ensuring unwavering project deliveries.

Start Watching
Tackle Any Design Complexity With the Constraint Manager
What's New in 23.11 •
使用约束管理器应对任何设计复杂性

对于企业版和专业版订阅用户，新约束管理器提供了基于表格的界面，无论从原理图还是 PCB 都可以访问，帮助您加强在约束定义方面的协作力度。工程师和协作者都可以轻松地共同设置设计约束。

Tackle Any Design Complexity With the Constraint Manager
What's New in 23.11 •
Tackle Any Design Complexity With the Constraint Manager

For enterprise and pro subscriptions, the new Constraint Manager offers a table-based interface, accessible from both Schematic and PCB, allowing you to define constraints more collaboratively. Engineers and stakeholders can collectively set design constraints with ease.

Embedded thumbnail for Minimize Manual Effort With Automatic Length Tuning
What's New in 23.11 •
Minimize Manual Effort With Automatic Length Tuning

Automatic Length Tuning introduces automatic length and delay tuning functionality in 2D mode, accessed conveniently from the main Route menu. This feature reduces the manual effort typically associated with length and delay tuning, expediting your design process.

Embedded thumbnail for Minimize Manual Effort With Automatic Length Tuning
What's New in 23.11 •
通过自动长度调整功能来减少手动操作

自动长度调整提供 2D 模式下的自动长度调整和延迟调整功能，可方便地从主布线菜单访问。该功能可以减少进行长度调整和延迟调整时通常需要的手动操作，从而加快设计进程。

Embedded thumbnail for The Most Common 2-Layer PCB Design Mistakes and How To Avoid Them
How-To's •
The Most Common 2-Layer PCB Design Mistakes and How To Avoid Them

Do you encounter issues when preparing a two-layer board? In this video, we address some of the most common mistakes made with this type of board and explain why upgrading to a four-layer board might be the solution you need.

Start Watching
Embedded thumbnail for Coming Soon: Ansys CoDesigner
How-To's •
Coming Soon: Ansys CoDesigner

Ansys CoDesigner (which will be released on the13th of December) simplifies your design process by connecting ECAD and Simulation to eliminate manual export/import steps. With features like design change synchronization and commenting, Altium Designer ECAD engineers and Ansys Electronics Desktop (AEDT) SIM engineers can collaborate seamlessly in one workspace.

Start Watching
Embedded thumbnail for Coming Soon: Automatic Multi-Net Tuning
How-To's •
Coming Soon: Automatic Multi-Net Tuning

Automatic Multi-Net Tuning enhances PCB design accuracy and efficiency by automatically adjusting multiple nets simultaneously to meet specific design rules, including length and delay. Learn more about this feature, which will be released on December 13th. Its flexibility enables effective work with differential pairs and traces at any angle. It not only identifies but also rectifies issues related to automatic length tuning, ensuring your designs adhere to key standards without the need for manual adjustments.

Start Watching
Your search returns no results.