×
Welcome, Guest

Sign in to learn, create, and do more with the product you love.

Sign In

News & Updates

Filters:
Embedded thumbnail for Avoid Solder Wicking
DFM and Fabrication Cost/Time Constraints •
Avoid Solder Wicking

If solder gets sucked into via holes in can cause an unreliable connection in your otherwise manufacturable design. We’ll show you a few easy ways to avoid this solder wicking using rules.

Start Watching
Rigid-Flex Applications
Blog •
Flex and Rigid-Flex PCB Applications

There are two basic reasons for designing a flex circuit into your product: to build a compact and efficiently assembled device, or to make the circuit dynamically integrated with the mechanical function of the product. You may, of course, lean on both of these reasons for justifying the use of flex circuits. On this note, let’s look at some rigid-flex PCB applications and design examples to see the issues that spring to mind when designing flex circuits

Read More
Altium Designer Interface
On-Demand Webinar •
Preparing your files for Fabrication Release

When you’re done creating a new board, it’s time to send your design data to the manufacturer. Before releasing your designs, you’ll want to make sure that everything is ready and works as intended. In this informative video, we’ll review some of the must-have checks before sending your output data for fabrication. 

Read More
Sharing Settings in Altium 365
Blog •
Granular Sharing — Role and Group Management

With Altium 365, you can grant permission to teams or users based on the specific needs of a project. We have expanded Altium 365’s file-sharing setting, giving you more granular control over who can download source files and reshare projects with others

Read More
Embedded thumbnail for MCAD CoDesigner Quick Start: Autodesk Inventor
Working with MCAD CoDesigner extension •
MCAD CoDesigner Quick Start: Autodesk Inventor

MCAD CoDesigner is built to address the challenges of electronic product design by enabling seamless collaboration between your electrical and mechanical engineers. This video will show you how to start collaboration between Altium Designer and Autodesk Inventor. 

Start Watching
Embedded thumbnail for Variants in Output Documents
How to work with Variants •
Variants in Output Documents

Variants can be used with output files to keep track of all the variations within your design. We’ll show you how to export these files including a Smart PDF, and an outjob file with variants.

Start Watching
Use your DRCs
Blog •
Design Rule Checking in the PCB Design Workflow

Any time you design a PCB, and you want to turn it into a real product, you will have to make sure the design obeys the constraints within the standard PCB manufacturing process. This imposes multiple rules on any design, and ECAD software will enforce design rules as you create the board to ensure you obey these important constraints. Make sure you enforce the right design rules at the beginning of the PCB design workflow 

Read More
Embedded thumbnail for Copper to Edge Clearance
DFM and Fabrication Cost/Time Constraints •
Copper to Edge Clearance

It is necessary to maintain edge clearance from your copper in your design. We’ll show you how to maintain it, what exceptions there are to the rule, and how you can ensure its manufacturability.

Start Watching
How to select high frequency materials
Blog •
Best Practices for High-Frequency PCB Material Selection

High frequency PCB design can seem esoteric, and I've heard many an engineer describe it as "black magic"! The subject is also a bit confusing, especially once someone asks which frequencies could be reasonably considered "high". Before you do anything inside the layout for a high-speed or RF PCB, you will need to pay attention to the materials being used in the board. If you're unsure which high frequency PCB materials you should use, then keep reading to learn more.

Read More
Embedded thumbnail for Design RF PCB: PCB edge plating
RF PCB Design •
Design RF PCB: PCB edge plating

Board edge plating provides additional noise suppression and improves EMC. This video provides some practical tips for creating metalized PCB edges in Altium Designer.

Start Watching
Embedded thumbnail for Using Parameters in Variants
How to work with Variants •
Using Parameters in Variants

You can use parameters to change your variants in many ways, such as text and titles. We’ll show you how to alter parameters in the PCB, Schematic, and Draftsman so you can create variants with different parameters.

Start Watching
PCB Noise Reduction
Blog •
PCB Noise Reduction: Do You Need Isolation, Shielding, or Filters?

Of all the noise and operational challenges designers face in their PCBs, there is one overarching problem that is arguably most popular: electronic noise. It could originate as an SI/PI problem, it could possibly arise from some external source, or it could be good old-fashioned crosstalk! These tend to fall into three categories: adding shielding, doing something to create isolation, or placing filters. Let's look at all of these as they tend to be the default solution set when confronted with many noise problems.

Read More
Webinar Preview
On-Demand Webinar •
CoDesigner and MCAD Component Placement On-Demand Webinar

We design products not just PCBs requiring effective collaboration between MCAD and ECAD engineers. We need to consider how we can reduce the likelihood of errors when placing critical design components. Component placement in the context of enclosures can be easily handled in an MCAD environment while it is more difficult to achieve in the ECAD domain. Learn how to place components from the MCAD side and synchronize them with Altium Designer ECAD models, designators, and sourcing data to simplify your design process.

Read More
What’s New in Altium 365
Blog •
What’s New in Altium 365: Version Control for Hardware, Layer Stackup in Web Viewer, and SOC 2 Type 1 Certification

In February, we hit a new record in the number of users on the platform. The Altium 365 user community is now 20,000 strong! You can now migrate from an external version control system to Altium 365 preserving the history of commits. We also received the SOC 2 Type 1 certification from KPMG, made layer stack available in the web viewer, and added the brand new capability to track tasks in the context of your design project. Keep reading to learn more!

Read More
Embedded thumbnail for How to efficiently use Blankets?
Blankets •
How to efficiently use Blankets?

Blanket is a powerful tool for group assignment of properties in schematic documents. It makes it easier and faster to assign circuit classes, differential pairs, and design rules within schematic documents. This video provides instructions on how to use blanket to simplify work in your designs. 

Start Watching
Embedded thumbnail for Query Language: How to Easily Create Expressions
Query Language •
Query Language: How to Easily Create Expressions

In this video the main tools which allow to simplify the process of building a query in Altium Designer will be considered. There are several such tools and each of them has its own limitations and peculiarities of use. 

Start Watching
Embedded thumbnail for What to Consider when Designing Edge Connectors
DFM and Fabrication Cost/Time Constraints •
What to Consider when Designing Edge Connectors

If your design requires edge connectors there are a few important things to consider. We’ll walk you through how to make sure your design with edge connectors is easy and manufacturable.

Start Watching
Rigid-Flex in Altium Designer
Blog •
Support for Rigid-Flex in Altium Designer

Rigid-flex in Altium Designer starts with designing a manufacturable PCB layer stack complete with via transitions and any calculated impedance requirements. Flex sections also need to be placed in the layer stack before moving into the PCB layout. Once inside the PCB editor, bending lines can be clearly defined in the PCB layout, and these can be visualized in Altium Designer's 3D PCB design tools. Keep reading to see how Altium Designer supports your flex and rigid-flex designs.

Read More
Embedded thumbnail for Design RF PCB: Distributed-Element Circuits
RF PCB Design •
Design RF PCB: Distributed-Element Circuits

Distributed-element circuits are a topology of a particular shape and size. Filters, power dividers, directional couplers can be built from them. Being calculated in third-party CAD, the topology of such elements can be easily imported into Altium Designer, and we will show you how to do it!

Start Watching
Blog • Apr 22, 2020
Any Angle Routing: When Should You Use It?

EDA tools have come a long way since the advent of personal computing. Now advanced routing features like auto-routers, interactive routing, length tuning, and pin-swapping are helping designers stay productive, especially as device and trace densities increase. Read full article in our blog:

Read More
Blog • Mar 20, 2020
A Message from Altium on COVID-19

We understand that many of you, like ourselves, have transitioned to working remotely. This process comes with its challenges and we would like to offer all and any help we can to minimize disruptions for your teams and business.

Read More
Blog • Mar 2, 2020
About Altium Designer Home Page

With the new Altium Designer Home page, we are aiming to help users stay up to date with the latest features and productivity tricks available in Altium Designer. Learn more about the Home page in this documentation article.

Read More
altium-community-forum
Blog • Feb 25, 2020
Getting Connected: Altium’s User Community Forums

The Altium design environment is a complex and sophisticated set of software tools. Not surprisingly, becoming proficient with these tools will take some time, and you’ll need to practice every step of the design process from beginning to end. So what happens if you get stuck along the way?

Read More
Embedded thumbnail for Placing Connections Between Boards
How to work with Multiboard •
Placing Connections Between Boards

A multi-board design requires relationships between several board designs referred to as interboard connections. We’ll show you the different types of connections and how to connect your boards using the proper connection type.

Start Watching
Embedded thumbnail for Show the Net Connections Between Select Components
How-To's •
Show the Net Connections Between Select Components

This video demonstrates how to show net-specific component connections. This is helpful when routing as you’re able to reduce clutter and focus on the connections on which you are working.

Start Watching
Embedded thumbnail for Draftsman Editor Settings
How to Work with Draftsman •
Draftsman Editor Settings

In this video we’ll go over the Draftsman editor settings and properties so you know how to set up the editor to be exactly what you need.

Start Watching
Embedded thumbnail for Assuring Your Board Is Large Enough to House All Components
How-To's •
Assuring Your Board Is Large Enough to House All Components

This video covers how to make sure your board is big enough to house all your components.

Start Watching
Embedded thumbnail for How to Create an Interactive PDF of a Schematic Diagram
How-To's •
How to Create an Interactive PDF of a Schematic Diagram

This video shows how to create an interactive PDF using the Smart PDF Wizard.

Start Watching
Embedded thumbnail for What is the Draftsman Document?
How to Work with Draftsman •
What is the Draftsman Document?

Once your PCB layout is finished it’s time for review. This is where the Draftsman Document and Altium Designer’s Draftsman Editor comes in.

Start Watching
Embedded thumbnail for Adding Project Modules to a Multi-board Schematic
How to work with Multiboard •
Adding Project Modules to a Multi-board Schematic

If you’re using multiple PCBs in your Multi-board design, Altium Designer allows you to add existing projects directly to your schematic with modules. We’ll show you how to quickly and efficiently add these projects to your Multi-board design.

Start Watching
Embedded thumbnail for Checking for Creepage in High Voltage Designs
How-To's •
Checking for Creepage in High Voltage Designs

High voltage devices have leakage currents that propage over the surface of the board. In such devices, it's important to consider not only the standard gap between the two topological elements, but also the shortest possible path between them, taking into account cut-outs and holes. With Altium Designer 20, you can check for creepage using the new creepage distance rule.

Start Watching
Embedded thumbnail for Creating BGA Footprints with the Footprint Wizard
How to create a PCB Footprint •
Creating BGA Footprints with the Footprint Wizard

Altium Designer makes it easy to create a BGA footprint using our IPC compliant footprint wizard. We'll show you how easily you can create and modify a BGA footprint using the footprint wizard.

Start Watching
Embedded thumbnail for How to Remove Unused Pad Shapes
How-To's •
How to Remove Unused Pad Shapes

Unused pad shapes can cause distortion among other problems so it is best to exclude them from your designs. This video shows how to remove unused pad shapes.

Start Watching
Embedded thumbnail for Stackup Presets and Templates
How to work with Layer Stack Manager •
Stackup Presets and Templates

In this video, we will learn how to apply predefined layer stacks to the board, as well as how to save the layer stack file as a template.

Start Watching
Embedded thumbnail for Creating a PCB Footprint Assembly Drawing
How to create a PCB Footprint •
Creating a PCB Footprint Assembly Drawing

If you need to create an assembly drawing of your PCB Footprint for your outjob files we can show you how in Altium Designer. We’ll walk through all the different options for your assembly drawing in your Draftsman document, how to create your assembly drawing and assign it designators.

Start Watching
Embedded thumbnail for Using the ActiveBOM
How-To's •
Using the ActiveBOM

Using the ActiveBOM: The Bill of Materials (BOM) contains a list of all the components with their designators, part numbers, values, and other parameters. An ActiveBOM manages the mapping from the design component (part) to the part that is purchased. This video describes how to use the ActiveBOM document to create an up-to-date list of components needed for your project.

Start Watching
Embedded thumbnail for Using Back Drills in your Stackup
How to work with Layer Stack Manager •
Using Back Drills in your Stackup

In this video, we will learn about Back Drilling technology, how to set up back drilling using the layer stack manager, and how to set up the Stub Length sizes for back drilling by specifying applicable nets using the Design Rules Editor.

Start Watching
Embedded thumbnail for How to Customize The Properties Panel
How-To's •
How to Customize The Properties Panel

How to Customize The Properties Panel: This video will go over how to customize the look and feel of the properties panel in Altium Designer. By being able to personalize your workspace you can greatly improve your efficiency

Start Watching
Embedded thumbnail for How to Create and Use Impedance Profiles
How to work with Layer Stack Manager •
How to Create and Use Impedance Profiles

Using the Altium Designer Layer Stack Manager, we will show how to create impedance profiles for transmission lines and how to apply them to the circuit board using the PCB Rules and Constraints Editor.

Start Watching
Your search returns no results.