×
Welcome, Guest

Sign in to learn, create, and do more with the product you love.

Sign In

News & Updates

Filters:
Embedded thumbnail for How to Use the MCAD CoDesigner?
How-To's •
How to Use the MCAD CoDesigner?

This video shows how the ECAD and MCAD engineers now can communicate directly while staying within their own design environment. The MCAD engineer is able to push design information directly from their design software straight into Altium Designer. Any changes can be reviewed, accepted, or denied by the receiving party. This process of pushing and reviewing design changes is bi-directional, meaning that both the MCAD or ECAD engineer can push and review changes to the other. 

Start Watching
chip with neon illumination
Blog •
How Does the Package PDN Impact Power Integrity?

Whenever we say something to the effect of “components can’t work without a correctly designed PCB,” we only have to look at component packaging for evidence. It is true that component packages come with parasitics that affect signal integrity, but there is one area that we don’t often look at in terms of component packaging: power integrity.

Read More
Embedded thumbnail for Creating Additional Snap Points Using a 3D Model
How to use Snapping •
Creating Additional Snap Points Using a 3D Model

Demonstration of using snap points with 3D models and how they can assist in the placement of said models.

Start Watching
electrical circuit with microcontroller
Blog •
Designing Custom Hardware with Microcontrollers

In this article, we’ll look at all that is required to start creating your own custom microcontroller-based hardware designs. You’ll see that there actually isn’t too much to this, as microcontroller manufacturers over the years have tried to make the learning curve less steep and their devices more, and more accessible. This is both from an electrical point of view but also – equally importantly – from a programming point of view.

Read More
Embedded thumbnail for Polygon Connect Styles
Working with Polygons •
Polygon Connect Styles

Define how vias and pads connect to polygons with a design rule. Customize the thermal relief width, number, and rotation as well as the air gap width.

Start Watching
Embedded thumbnail for How to work with Component Classes?
How to Work with Classes •
How to work with Component Classes?

Modern printed circuit boards can contain a large number of components, which makes them difficult to work with. In this video we will show what component classes can be on a PCB, how to create custom component classes and how they can be useful for us. 

Start Watching
high-speed printed circuit board
Blog •
Guide to Low-Dk PCB Materials

If you’ve taken time to learn about PCB material options and layer constructions, you have probably seen the wide range of materials that are available on the market. Materials companies produce laminates with varying Dk values, Tg values, weave styles, CTI values, and mechanical properties to target various applications in the electronics industry.

Read More
printed circuit board, photo by the author
On-Demand Webinar •
Learn to Collaborate Like a Pro with Altium Designer 23

Get ready to speed up your design process with new Altium Designer collaboration capabilities. Designing a PCB is a team effort. Engineers must work with customers, manufacturers, and other stakeholders to get the best results. You need help to bring your design to life, even if you're a one-person team.

Read More
freeway in the background of the city
Blog •
Designing for V2X Communication: Wireless Protocols and Standards

If you’re waiting for truly connected cars on a grand scale, there is still a massive amount of work to be done, both on the hardware and software sides. Connected cars can only become a widespread reality once the automotive industry and telecom carriers can decide which protocol will work best for vehicle-to-everything (V2X) communication. PCB designers will then need to step in to create these systems and fit them into a vehicular environment.

Read More
Embedded thumbnail for Create and Snap to a Circular Grid (Polar Grid)
How to use Snapping •
Create and Snap to a Circular Grid (Polar Grid)

Instructional on how to create polar grids, how to snap to them, and why you might want to use them.

Start Watching
Embedded thumbnail for How to Connect Polygons to Nets
Working with Polygons •
How to Connect Polygons to Nets

This video covers how to easily connect a polygon to a net using just two clicks. With the Properties panel open and a polygon selected, click the "Assign net" button in the Properties panel.

Start Watching
Embedded thumbnail for Altium 365 Getting Started: Gerber Compare
Getting Started with A365 •
Altium 365 Getting Started: Gerber Compare

The task of comparing different versions of manufacturing files usually arises when the electrical engineer needs to check and confirm the manufacturer's edits or clarify details of changes before starting production. In Altium 365 you can perform an automatic comparison of Gerber files. 

Start Watching
Embedded thumbnail for Altium 365 Getting Started: Schematic Compare
Getting Started with A365 •
Altium 365 Getting Started: Schematic Compare

The schematic sheets in a project are subject to change over time, and sometimes it may be necessary to compare several different versions and detect differences between them. In Altium Designer you can easily perform an automatic comparison of any revisions of schematic documents. 

Start Watching
Embedded thumbnail for Altium 365 Getting Started: Migrate to Altium 365 from other VCS
Getting Started with A365 •
Altium 365 Getting Started: Migrate to Altium 365 from other VCS

The development of electronic devices always involves the release of many different types of files. And these files are not static - they change as the project progresses. Traditionally, one way to manage data is to use a version control system such as Git or SVN. Unlike other VCSs, Altium 365 is the system designed specifically for managing project data.

Start Watching
Everything You Need to Know About Stitching Vias
Blog •
Everything You Need to Know About Stitching Vias

This one area of PCB design can be contentious among some designers as it is related to copper pour, which it is often stated is not needed in most designs. Regardless of your feelings about copper pour, stitching vias have important uses in PCBs at low frequencies and at high frequencies.

Read More
Embedded thumbnail for How to get a BOM for a Multi-board Design
How-To's •
How to get a BOM for a Multi-board Design

When designing a multi-board project, an up-to-date and accurate BOM for the entire device is a necessity. Watch this video to learn how to properly create a BOM for your multi-board project.

Start Watching
Embedded thumbnail for Remove Unused Pad Shapes
Working with Polygons •
Remove Unused Pad Shapes

Unused pad shapes create holes in your copper geometries. You can quickly examine all pads in the design to remove unused pad shapes and restore previously removed pads. 

Start Watching
Embedded thumbnail for Effective use of "Objects for snapping" when creating a Footprint
How to use Snapping •
Effective use of "Objects for snapping" when creating a Footprint

Learn how to effectively use snaps that allow you to create a component footprint quickly and conveniently

Start Watching
All About Box Build Assemblies
Blog •
All About Box Build Assemblies

When you’re ready to manufacture a new device at production volume, there are many aspects of the product that must come together. The enclosure, cabling and connectors, embedded software/firmware, and of course the PCBA all have to be considered in totality. There is a quick way to get your product into a usable enclosure, complete with input power and cabling, and with a form factor that fits your PCBA. This overused route to a new product is a box build assembly. 

Read More
Blog •
Altium Designer: Leading the Charge in PCB Design Innovation

In the dynamic field of electronics design, Altium Designer stands out as a pioneer, continuously advancing the boundaries of PCB (Printed Circuit Board) design. Discover the latest innovations in 3D-MID design, high-speed design, and interactive routing in this new article by David Marrakchi.

Read More
Blog •
What Is Solder Mask Expansion and Which Value Should You Use?

Check out our new article explaining how to ensure sufficient pad area for soldering, manage misregistration tolerance, and maintain proper solder dams between components. It also highlights the role of collaboration with fabrication houses and the use of CAD tools in defining land patterns for advanced electronics designs.

Read More
Blog •
Pi.MX8 Project - Board Layout Part 3

We continue our exploration of the Pi.MX8 open-source computer module project. In this new installment, we focus on routing planning and then cover all the layers' routing with all the details you need to know if you want to prepare a similar project.

Read More
Blog •
Mastering Blind and Buried Vias

Check our compilation of essential resources you'll need to use blind and buried vias successfully in an HDI PCB. In our brand new article, we present the main and most valuable information about this technology, which may not be new but is still highly useful in High-Density Interconnect projects.

Read More
Blog •
Make Sure to Clean Your No-Clean Flux

No-clean flux has become popular due to its convenience. Learn more about why this solution is used, why cleaning might still be necessary, and how to remove no-clean flux residues. We will try to dispel all these doubts in this brand new article.

Read More
Blog •
How to Design a Thermal Prototype PCB

Thermal problems in PCBs often go unnoticed until prototyping, which can be costly. Design teams can't afford endless iterations, but they can conduct lower-cost thermal prototypes. Learn more about this approach in our new article.

Read More
Blog •
DC-Aware Return Current in Mixed Signal PCBs

In this article, we will examine specific cases involving these types of components, where a very low-frequency signal or a DC signal needs to be measured, and the return path must be tracked to ensure the current loop is tight.

Read More
Blog •
PCB Layout Replication: The Perfect Tool for Test Jigs

Replicate your circuits across multiple blocks with just a few clicks using a flawless preview pane, ensuring consistent, perfect results without the need for trial and error. Check out our new article on the PCB Layout Replication feature.

Read More
Altium 365 GovCloud Why We Chose AWS GovCloud (US) Cover
Blog •
4 Reasons Why We Chose AWS GovCloud (US) for Altium 365 GovCloud

In this blog, we explain the reasons behind our decision to operate Altium 365 GovCloud within AWS GovCloud (US). This partnership is guided by a clear vision: to provide our users with a secure, compliant, and reliable platform for sensitive electronics design data.

Read More
Blog •
3D MID Design Whitepaper

Dive into a dynamic design experience where you can visualize and edit your circuits in true 3D, offering unparalleled precision. Altium Designer's 3D-MID (Mechatronic Integrated Device) Design tool revolutionizes the design process, providing a fresh perspective. Explore the capabilities and benefits of this feature in our comprehensive guide.

Read More
Embedded thumbnail for Creating Connectivity
How to Work with Multichannel Schematic •
Creating Connectivity

Multichannel connectivity can be created in a few different ways. We’ll show you how to create connectivity using ports and net labels efficiently and effectively. 

Start Watching
Embedded thumbnail for Hierarchical Structure for High-Speed Projects
How To Work with High-Speed Projects •
Hierarchical Structure for High-Speed Projects

A Hierarchical structure can make your high speed project much easier to navigate and complete. We’ll show you some tips and tricks for creating and maintaining a high speed. Hierarchical design project.

Start Watching
Embedded thumbnail for Schematic Design Reuse Using Snippets
How to work with Snippets •
Schematic Design Reuse Using Snippets

Snippets allow you to easily reuse circuitry across multiple parts of your designs. We’ll show you how create a new snippets the Schematic and how to connect and annotate it so you can easily bring your circuitry directly into your board.

Start Watching
Embedded thumbnail for PCB Design Reuse Using Snippets
How to work with Snippets •
PCB Design Reuse Using Snippets

Snippets give you easy access to reuse circuitry on your PCB. Let’s take a look at how you can create and configure snippets for the PCB, connect a component link with the schematic and update the PCB to include your snippet.

Start Watching
Embedded thumbnail for Creating Schematic Channels
How to Work with Multichannel Schematic •
Creating Schematic Channels

Altium Designer makes creating single and multichannel designs effective and quick. We’ll show you how to create and annotate output and input channels in your design. 

Start Watching
Embedded thumbnail for Using Snapping for Primitives and Components | Draftsman Documents
How to Work with Draftsman •
Using Snapping for Primitives and Components | Draftsman Documents

Snapping using the grids and snapping tools in Altium Designer’s Draftsman Editor gives you a lot of control over how you create and annotate primitives and components. We’ll show you how easy it is to use snapping in the Draftsman Editor. 

Start Watching
Embedded thumbnail for Pin Package Delay | High-speed Design
How To Work with High-Speed Projects •
Pin Package Delay | High-speed Design

There are a few things to consider when adding and tuning signal delay to your design. Altium Designer gives you the tools to address the fine tuning for signal delay so you can easily make it work, using pin package delay. 

Start Watching
Embedded thumbnail for Introduction to Snapping Options
How to use Snapping •
Introduction to Snapping Options

Introduction to snapping options: grids, guides, axes of objects, and snapping to objects.

Start Watching
Embedded thumbnail for Working with Tables | Draftsman Document
How to Work with Draftsman •
Working with Tables | Draftsman Document

The Draftsman Document Editor allows you to add all your data for your design through tables. We’ll show you how to work with tables, and the various options to add and edit, such as Bill of Materials, Drill Tables, Transmission Line Tables, and custom tables. 

Start Watching
Embedded thumbnail for Pin Part Swapping | High-speed Design
How To Work with High-Speed Projects •
Pin Part Swapping | High-speed Design

If you have a lot of traces intersecting on a single layer, but you need to minimize the amount of vias for your high speed design, you can utilize pin and part swapping. Altium Designer has tools to solve these issues, and we’ll show you how to solve them.

Start Watching
Embedded thumbnail for How to Route High-Speed Designs | High-Speed Design
How To Work with High-Speed Projects •
How to Route High-Speed Designs | High-Speed Design

Routing for your high-speed design can be really easy with just a little preparation. We’ll walk you through the best ways to set up your routing so you can easily route your high-speed signals. 

Start Watching
Embedded thumbnail for How to Define A Net Class on Schematic | How To Use Altium Designer
How-To's •
How to Define A Net Class on Schematic | How To Use Altium Designer

Altium Designer makes it easy to define net classes in both PCB and the schematic. We’ll show you how to define a net class in the schematic for whatever classes you need. 

Start Watching
Embedded thumbnail for Creating Differential Pairs in the Schematic
How to Work with Differential Pairs •
Creating Differential Pairs in the Schematic

Learn how to create differential pairs on the schematic side.

Start Watching
Embedded thumbnail for Measuring in the PCB
How-To's •
Measuring in the PCB

Altium Designer gives you fine grained control over how you measure object distances in the PCB. When spacing is such a critical aspect of board layout, this control is absolutely necessary. We'll show you how to utilize the measure distance command and measure selected objects, as well as how to measure tracks and faces of 3D bodies.

Start Watching
Embedded thumbnail for Quantel Laser | MCAD and ECAD Designers Collaborate with Altium
Discovering Altium 365 •
Quantel Laser | MCAD and ECAD Designers Collaborate with Altium

In this video, Quantel’s engineers - Jeremie Waller (Senior Electrical Engineer) is using Altium Designer for ECAD and Laine McNeil (Senior Mechanical Engineer) is using Solidworks for MCAD. They are both in an Altium 365 workspace that allows them to closely collaborate while staying in their own familiar design environment.

Start Watching
Embedded thumbnail for Using Free (Any) Angle Routing
How-To's •
Using Free (Any) Angle Routing

In this video, you will see how Altium Designer now makes it extremely easy to create curved corners in your designs. Previously, arc-in-corner routing was only supported during interactive routing, but not in Push&Shove mode or during track sliding. The new Push&Shove engine solves this by adding arcs during push and shove and also during track sliding, which is done by switching to any angle corner mode to perform snake routing.

Start Watching
Your search returns no results.